Detalles de los productos

En casa > Productos >

LPCB Certified TX7130 Reflective Optical Beam Smoke Detector – High-Sensitivity Fire Detection with Wide Coverage (Up to 1000㎡), Ideal for Open-Air Factories, Exhibition Halls & Logistics Centers

Todas Las Categorías

Sistema convencional de alarma contra incendios

Sistema de alarma contra incendios dirigible

Detector de llamas de alarma de incendio

Detector de humo independiente

Contacta con nosotros

Ms. Claire

Claire.tian@xinheantech.com

+8615986702194

Contacta ahora

LPCB Certified TX7130 Reflective Optical Beam Smoke Detector – High-Sensitivity Fire Detection with Wide Coverage (Up to 1000㎡), Ideal for Open-Air Factories, Exhibition Halls & Logistics Centers

Nombre De La Marca:	TANDA
Número De Modelo:	TX7130
Cuota De Producción:	1
Precio:	negotiable
Detalles Del Embalaje:	Se trata de una muestra de las características de los productos.
Condiciones De Pago:	T/T, Western Union,

Información detallada

Descripción del Producto

Información detallada

Lugar de origen:

Porcelana

Certificación:

Documento:

Fuente de alimentación:

CC 24 V

Tipo:

Detector de haz infrarrojo

Certificaciones:

El LPCB

Aplicación:

sistema de alarma contra incendios convencional/direccionable

Tipo de detector:

Detector de humo de haz reflectante

Producción:

Producción real: 1A DC24V

Instalación:

Montura de techo o pared

Paquete de transporte:

caja de cartón

Duración del camino:

los 5-100m

Rango de humedad:

0-95% no condensante

Temperatura de funcionamiento:

-10 a 50 grados Celsius

Capacidad de la fuente:

1000PCS/MES

Descripción del Producto

LPCB Certification TX7130 Reflective Optical Beam Smoke Detector For High-Performance Fire Detection

LPCB Certified TX7130 Reflective Optical Beam Smoke Detector – High-Sensitivity Fire Detection with Wide Coverage (Up to 1000㎡), Ideal for Open-Air Factories, Exhibition Halls & Logistics Centers 0

Introduction

The TX7130 reflective optical beam smoke detector incorporates a light transmitter and the detector on the same unit. The light path is created by reflecting light emitted from the transmitter off a retro- reflector, meaning it is reflecting light back to its source with a minimum of scattering, which is placed opposite the detector.

In a fire, when smoke falls within the path of the beam detector, some of the light is absorbed or scattered by the smoke particles. This creates a decrease in the received signal, leading to an increase in optical obscuration. This unit decodes or analysts received signals and compare to the pre-programmed algorithm stored on the processor. Through this algorithm the detector will decide whether fire is defined or not and lead to enablement the corresponding relays and LED indicators. The unit on the operating mode maintaining continually emitting light, care should be taken that the activities in the space do not obstruct the beam or move the device to avoid false operation of the detector

Specifications

Operating Voltage 20 V to 28 V DC

Current Parameters Standby: 23mA Commission: 56mA Alarm: 33mA

Beam Sensor Sensitivity [via Encoder] Level 1: 2.6 dB High Sensitivity

Level 2: 3.8 dB Medium Sensitivity

Level 3: 5.8 dB Low Sensitivity

Beam Pathway Length [via Encoder] Span 1: 8 to 20 meters Limited Path

Span 2: 20 to 40 meters Short Path

Span 3: 40 to 70 meters Normal Path

Span 4: 70 to 100 meters Long Path

Beam Path Angle ±0.4º Directional (This data takes the average of the left and right deflection angles.)

Alignment Guide Laser Beam Pointer

Digital Display Guide Nixie Tube

LED Indicator Guide Red: Fire ; Yellow: Fault ; Green: Alignment

Reset Time Less than 2 Second

Relay Capacity [Fire & Fault] Normally Open & Close/ 2.0 A; 30 VDC

Material / Colour ABS / White

Dimension / Weight L:190.87 x W:126.87 x H:91.96 mm / 440 gm

Weight 0.130 Kg with base

Operating Temperature -10°C to +50°C

Ingress Protection Rating IP30 [IP66 glue seal-For permanent fixing

Humidity 0 to 95% Relative Humidity, Non condensing

Product Range

Conventional Fire Alarm System
Addressable fire alarm system
Gas Extinguishing control system
Beam Detector
4 wire smoke detectors with relay output.
2 wire Conventional smoke and heat detectors
Explosion-proof flame detector for fire alarm system
Standalone smoke detectors and combustable gas detector

Service

1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.

Etiquetas:

Detector de haz infrarrojo

Detector de humo de haz

Detector de haz convencional

Detalles De Los Productos

En Casa > Productos >

detector del haz

LPCB Certified TX7130 Reflective Optical Beam Smoke Detector – High-Sensitivity Fire Detection with Wide Coverage (Up to 1000㎡), Ideal for Open-Air Factories, Exhibition Halls & Logistics Centers

Todas Las Categorías

Sistema convencional de alarma contra incendios

Sistema de alarma contra incendios dirigible

Sistema de extinción de gases

detector del haz

Detector de llamas de alarma de incendio

4 Detector de humo de alambre

Detector de gas para el hogar

Detector de humo independiente

LPCB Certified TX7130 Reflective Optical Beam Smoke Detector – High-Sensitivity Fire Detection with Wide Coverage (Up to 1000㎡), Ideal for Open-Air Factories, Exhibition Halls & Logistics Centers

Nombre De La Marca:	TANDA
Número De Modelo:	TX7130
Cuota De Producción:	1
Precio:	negotiable
Detalles Del Embalaje:	Se trata de una muestra de las características de los productos.
Condiciones De Pago:	T/T, Western Union,

Información detallada

Descripción del Producto

Información detallada

Lugar de origen:

Porcelana

Nombre de la marca:

TANDA

Certificación:

LPCB

Número de modelo:

TX7130

Documento:

Manual del producto PDF

Fuente de alimentación:

CC 24 V

Tipo:

Detector de haz infrarrojo

Certificaciones:

El LPCB

Aplicación:

sistema de alarma contra incendios convencional/direccionable

Tipo de detector:

Detector de humo de haz reflectante

Producción:

Producción real: 1A DC24V

Instalación:

Montura de techo o pared

Paquete de transporte:

caja de cartón

Duración del camino:

los 5-100m

Rango de humedad:

0-95% no condensante

Temperatura de funcionamiento:

-10 a 50 grados Celsius

Cantidad de orden mínima:

Precio:

negotiable

Detalles de empaquetado:

Se trata de una muestra de las características de los productos.

Tiempo de entrega:

7 días laborables

Condiciones de pago:

T/T, Western Union,

Capacidad de la fuente:

1000PCS/MES

Descripción del Producto

LPCB Certification TX7130 Reflective Optical Beam Smoke Detector For High-Performance Fire Detection

Specifications

Operating Voltage 20 V to 28 V DC

Current Parameters Standby: 23mA Commission: 56mA Alarm: 33mA

Beam Sensor Sensitivity [via Encoder] Level 1: 2.6 dB High Sensitivity

Level 2: 3.8 dB Medium Sensitivity

Level 3: 5.8 dB Low Sensitivity

Beam Pathway Length [via Encoder] Span 1: 8 to 20 meters Limited Path

Span 2: 20 to 40 meters Short Path

Span 3: 40 to 70 meters Normal Path

Span 4: 70 to 100 meters Long Path

Beam Path Angle ±0.4º Directional (This data takes the average of the left and right deflection angles.)

Alignment Guide Laser Beam Pointer

Digital Display Guide Nixie Tube

LED Indicator Guide Red: Fire ; Yellow: Fault ; Green: Alignment

Reset Time Less than 2 Second

Relay Capacity [Fire & Fault] Normally Open & Close/ 2.0 A; 30 VDC

Material / Colour ABS / White

Dimension / Weight L:190.87 x W:126.87 x H:91.96 mm / 440 gm

Weight 0.130 Kg with base

Operating Temperature -10°C to +50°C

Ingress Protection Rating IP30 [IP66 glue seal-For permanent fixing

Humidity 0 to 95% Relative Humidity, Non condensing

Product Range

Etiquetas: